MG-Rover.org Forums banner
bleed
1-4 of 4 Results
  1. MG ZR / Rover 25, 200 & Streetwise
    The performance of the brakes in my Rover 25 were noticeably poor, so I decided to check them. Firstly, I stripped, cleaned and inspected the pads on the front and shoes on the rear. All were well within specified thickness and didn't bind. I decided to renew the old brake fluid, but on...
  2. MG ZR / Rover 25, 200 & Streetwise
    Woot! Yesterday evening was a filthy dirty freezing backbreaking evening, during which I (with the help of a friend) succeeded in changing the inlet maifold gasket and changed all the coolant for fresh OAT. Doing that job in the dark is certainly interesting, but we got it done in the end...
  3. Rover 600
    One of the most overlooked and easiest things to maintain is the clutch fluid, I try to change mine at least once a year, two max. Its overlooked as changing the clutch fluid is not on any service schedule, it should be as debris and worn out fluid is often the cause of cylinder and seal wear...
  4. MGF and MGTF
    Hi, Did the repair on the slave clutch cylinder today. Think I've done it right after a lot of swearing and sweating. The knackered seal in the piston jammed half out so had to remove the slave cylinder housing first as I couldn't get the clevis pin arrangement out. Grr. As a result of all...
1-4 of 4 Results
Top