MG-Rover.org Forums banner
ball joints
1-3 of 3 Results
  1. MGF and MGTF
    Sigh. Failed on too much play in front ball joints. Having the work done on Friday, but can anyone give me an estimate of what it might cost? This on top of my rear screen splitting in the frost on Tuesday. (anyone know of a glass screen fitter close to Oxford - I've had enough. I'm looking at...
  2. MGF and MGTF
    Hi All, For a while now I've been putting up with a lousy ride and some "unsafe" feelings when driving my F. I.e. steering just doesn't feel right. She had her clutch and a load of other bits done recently including a drain and refill of the hydragas system. When I got the car back all was...
  3. MGF and MGTF
    Just did this on mine, if anyone wants to know? Take the hub off, and then use a decent angle grinder with a small grinding disc and take the tops off the rivet. These are tapered and won't come out without some drilling. I used these, which make easy work - 15 quid from B&Q. Other bits will...
1-3 of 3 Results
Top