MG-Rover.org Forums banner

Search results

1-20 of 464 Results
Advanced Search
  1. Memories of Mgrover dealership.

    MG / Rover Related Chat - up to 2005
    only just stumbled on this thread, so a bit late to the party our experience when we bought our first MG TF new in 2004 from an MG- Rover dealer was a bit shady to say the least we weren’t gen’d up on MG TF’s as we were looking more on the Mazda MX5, but thought to take a look at our local...
  2. Fuel Trim Figures

    MGF and MGTF
    as no-one has come back to you, I don’t know if any of this readout is any good to you, it’s off a 1.8K non VVC engine with a MEMS 1.9 hope it's of some use to you
  3. Hi all

    Introduce yourself
    welcome :)
  4. Fuel Pump

    MGF and MGTF
    or have you thought of visiting your local scrapy and see if they have an MGF/TF and take the pump out of one of those? I would guess you'd pick one up for around a tener
  5. Rover Sreetwise (55 license plate) installing rear view camera?

    MG ZR / Rover 25, 200 & Streetwise
    if it’s any help, a friend of mine had one of those 7” ICE radio with a reversing camera, and the instructions that came with it said to connect one of the wires powering the camera up to either the reversing light wire or to the reversing gearbox wire, when once I was in his car, it was fun...
  6. Delphi DS 150e and MEMS-Diag

    MGF and MGTF
    I bought myself two diagnostics tools for my car which has a 1.8 K series engine with a MEMS 1.9 a standard engine giving out (approx) 118 BHP, one is the Delphi DS 150e (copy) and the other is MEMS_Diag (the full version) both seem to work OK in that they give consistent results at a given...
  7. mg-rovermobile mechanics

    MGF and MGTF
    I think you'll find they have a good reputation in the MG world (not that things never go wrong), if they weren’t up to scratch you’d soon hear about it, I’m planing on taking my car there to have it’s cam belt changed (when I get the electrics on my car sorted out), myself this will be the...
  8. is it my Crankshaft?

    MGF and MGTF
    thats interesting Nigel, did they find a remedy for this, or know what caused it? my manifold is the plastic one, the only thing I did change was the plastic TB, it came with the plastic 48mm TB and I replaced that with a 52mm ali TB, this was changed around 7 years ago
  9. is it my Crankshaft?

    MGF and MGTF
    Thank you Chris, I'll get that off and have a look and clean it, one thing I didn't mention, I find the fuel pump sounds a little bit noisier now, not sure it’s true or just I’m more sensitive as the car has issues
  10. is it my Crankshaft?

    MGF and MGTF
    I hope this is in the fight forum :) I think this is might be a tough one (and a bit long), my car is well looked after and serviced, last year I went on a European trip, one I have been doing in this car for the past 8 years, it has the 1.8 K series engine with MEMS 1.9, is a MY2000 on...
  11. What have I done ?

    Introduce yourself
    welcome :)
  12. Thinking of selling my MGF Trophy - what price?

    MGF and MGTF
    as the OP hasn't been on here since 2014, I'd say he did get rid of it and moved on, SORN'd is no indication the car is in one bit, it could of been scrapped long ago
  13. MGTF lost gears

    MGF and MGTF
    I had the same issue, the ramps were a bit too steep so I got hold of a 1M (approx) aluminium box section I then cut it in to two, drilled a hole in this and the ramp to slide through a bolt and hay presto a low ramp I got the ali box section from metal scrap yard for a fiver, job and...
  14. An appalling & shocking discovery

    MG / Rover Related Chat - up to 2005
    do they ( Hursley Hill Garage/SMG) really thin those 15/16 year old Rovers will fetch that much?
  15. Went to buy an MG6 today...

    MG 6
    I've enjoyed reading this thread
  16. How Long Have You Had Yours?

    MGF and MGTF
    we bought our TF new on the 28th of May 2004 and joind this forum a week later
  17. thread and pitch size of the bleed nut/bolt

    MGF and MGTF
    thank you herbie, I'm on the look out for an M12 x 1.25 banjo now :)
  18. thread and pitch size of the bleed nut/bolt

    MGF and MGTF
    a little update I bought this Goodridge banjo off eBay tonight https://www.ebay.co.uk/itm/312303916033 when it gets here I’ll see if my idea is a good one
  19. thread and pitch size of the bleed nut/bolt

    MGF and MGTF
    thank you all so much for the help, so it's a M6 x 1mm pitch I need to be looking out for, right got some googling to do tonight :)
  20. thread and pitch size of the bleed nut/bolt

    MGF and MGTF
    I came across this site with some facts on threads I might have to get one of each and use the one that fits
1-20 of 464 Results
Top